Hürlimann XV V-DRIVE

Coolant capacity & service interval

Hürlimann XV V-DRIVE coolant capacity is 12 liters. Service intervals include checking at 10 hours and changing at 2400 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
XV 100 V-DRIVE, ->ZKDEN10200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XV 105 V-DRIVE, ->ZKDEN90200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XV 115 V-DRIVE, ->ZKDEP30200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XV 90 V-DRIVE, ->ZKDEM70200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XV 90.4 V-DRIVE, ->ZKDEN50200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • The Hürlimann XV V-DRIVE cooling system capacity is 12 liters across all five variants covered — the XV 90, XV 90.4, XV 100, XV 105, and XV 115 V-DRIVE — indicating a uniform cooling circuit volume regardless of engine output rating.
  • A coolant level check interval of 10 hours applies to all listed variants under normal use conditions, reflecting the relatively short inspection cycle typical of agricultural machinery operating in demanding field environments.
  • The coolant change interval is specified at 2400 hours or 24 months, whichever comes first, combining an engine-hours threshold with a calendar-based limit to account for both high-use and low-use operating patterns.
  • The 24-month calendar interval alongside the 2400-hour threshold means that on lower-utilization machines, a coolant change would fall due on time before the hour count is reached, as coolant degrades chemically over time independent of engine runtime.
  • All five variants share serial number prefixes beginning with ZKD, with individual model codes embedded in the prefix — ZKDEM7 for the XV 90, ZKDEN5 for the XV 90.4, ZKDEN1 for the XV 100, ZKDEN9 for the XV 105, and ZKDEP3 for the XV 115 — each with a lower serial number boundary of TH50001 for the 2019 starting point.
  • The consistent 12-liter capacity across the XV 90 through XV 115 V-DRIVE range suggests the cooling system architecture is shared across the lineup despite the differing power outputs, which span from 90 to 115 horsepower.

Other Systems