Hürlimann XS V-DRIVE

Brake fluid capacity & service interval

Hürlimann XS V-DRIVE uses brake fluid with a capacity of 1 liter. Service intervals require a check every 50 hours. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
XS 100 V-DRIVE, Stage 5->ZKDHE90200TH50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 105 V-DRIVE, Stage 5->ZKDHF10200TH50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 115 V-DRIVE, Stage 5->ZKDKJ60200TH50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 90 V-DRIVE, Stage 5->ZKDHE80200TH50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 95 V-DRIVE, Stage 5->ZKDHF00200TH50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 100 V-DRIVE, Stage 3B->ZKDEK70200TH50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 105 V-DRIVE, Stage 3B->ZKDEL50200TH50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 115 V-DRIVE, Stage 3B->ZKDEL90200TH50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 90 V-DRIVE, Stage 3B->ZKDEK30200TH50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
XS 90.4 V-DRIVE, Stage 3B->ZKDEL10200TH50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • Across all Hürlimann XS V-DRIVE configurations listed, the hydraulic brake system holds a capacity of 1 liter. In agricultural machinery, brake fluid capacity at this scale typically reflects the total volume of the closed hydraulic circuit serving the braking components rather than a reservoir-only figure.
  • The 50-hour check interval applies uniformly to all listed variants under normal use conditions. On tractors used in field operations, hour-based service intervals are standard practice, as engine hours accumulate far more rapidly than calendar time would suggest for equivalent workloads.
  • Stage 3B variants of the XS 90, XS 90.4, XS 100, XS 105, and XS 115 V-DRIVE all share the same 1-liter capacity and 50-hour check interval, indicating a consistent hydraulic brake circuit design across the lower-emission-tier models in the range.
  • Stage 5 variants covering the XS 95, XS 90, XS 100, XS 105, and XS 115 V-DRIVE carry identical brake fluid specifications to their Stage 3B counterparts. Stage 5 refers to the EU's most stringent non-road mobile machinery emission standard, yet the brake system capacity and service interval remain unchanged between tiers.
  • The XS 90.4 V-DRIVE appears exclusively in a Stage 3B configuration within the listed specifications, with a serial number sequence beginning at ZKDEL10200TH50001 from 2020. No Stage 5 counterpart for the XS 90.4 designation is present in the data.
  • Serial number thresholds are listed for each variant, functioning as production cut-off points that define which units a given specification applies to. For all Stage 3B entries, the starting serial numbers follow a 2020 introduction, while Stage 5 entries begin from 2022.

Other Systems