Hürlimann XM COM3

Differential fluid capacity & service interval

Hürlimann XM COM3 uses differential fluid with a capacity of 8,5 liters. Service intervals include checking every 250 hours and changing every 1000 hours or 12 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • XM100 COM3, ->ZKDJ880200TH10001 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • XM110 COM3, ->ZKDL350200TH10001 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • XM110 Hi-Level COM3, ->ZKDL480200TH15001 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • XM115 DCR COM3, ->ZKDL360200TH10001 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • XM115 Hi-Level DCR COM3, ->ZKDL490200TH15001 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • XM125 DCR COM3, ->ZKDL370200TH10001 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • XM125 Hi-Level DCR COM3, ->ZKDL500200TH15001 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • All seven variants of the Hürlimann XM COM3 series covered in these specifications share an identical front differential fluid capacity of 8.5 liters. In agricultural machinery, a front differential fill of this volume is consistent with a heavy-duty front axle assembly designed for four-wheel-drive operation under field conditions.
  • The XM100 COM3, XM110 COM3, XM115 DCR COM3, and XM125 DCR COM3 are each identified by a serial number threshold prefixed with ZKDJ or ZKDL, indicating that the specifications apply to units produced up to those respective serial numbers within the 2010-2016 production window.
  • Hi-Level variants, including the XM110 Hi-Level COM3, XM115 Hi-Level DCR COM3, and XM125 Hi-Level DCR COM3, carry serial number thresholds beginning at TH15001, whereas standard and DCR variants begin at TH10001. Despite this distinction, the front differential capacity and service intervals are identical across both groups.
  • The check interval for the front differential is set at 250 hours across all listed variants. In hour-based service schedules typical of agricultural tractors, a 250-hour check interval represents a relatively frequent inspection point, allowing fluid condition and level to be monitored well before the full change interval is reached.
  • The fluid change interval is specified as 1,000 hours or 12 months, whichever comes first. The dual-trigger format, combining an operating-hour threshold with a calendar-based limit, accounts for machines that accumulate hours slowly, ensuring fluid degradation over time does not go unaddressed regardless of usage intensity.
  • All rows carry a use condition of normal, meaning the 1,000-hour and 12-month change intervals apply to standard operating conditions. No separate severe-use interval is listed for any of the seven variants.
  • The DCR designation appears on the XM115 DCR COM3, XM125 DCR COM3, and their Hi-Level counterparts. Regardless of whether a variant carries the DCR designation or not, the front differential capacity of 8.5 liters and the associated service schedule remain unchanged across the full XM COM3 range covered here.

Other Systems