Hürlimann XM COM3

Coolant capacity & service interval

Hürlimann XM COM3 coolant capacity is 21 liters. Service intervals include checking every 10 hours and changing every 1000 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
XM100 COM3, ->ZKDJ880200TH10001 (2010-2016)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
XM110 COM3, ->ZKDL350200TH10001 (2010-2016)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
XM110 Hi-Level COM3, ->ZKDL480200TH15001 (2010-2016)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
XM115 DCR COM3, ->ZKDL360200TH10001 (2010-2016)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
XM115 Hi-Level DCR COM3, ->ZKDL490200TH15001 (2010-2016)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
XM125 DCR COM3, ->ZKDL370200TH10001 (2010-2016)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
XM125 Hi-Level DCR COM3, ->ZKDL500200TH15001 (2010-2016)
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months

Additional Notes

  • All seven configurations of the Hürlimann XM COM3 series share an identical cooling system capacity of 21 liters, indicating a common engine cooling architecture across the XM100, XM110, XM115, and XM125 variants for the 2010-2016 production range.
  • The 21-liter figure represents the total cooling system fill volume, which in agricultural tractors typically accounts for the engine block, cylinder head passages, radiator, and associated hoses rather than a partial service top-up quantity.
  • Coolant level checks are specified at 10-hour intervals under normal use conditions, a frequency consistent with the demanding thermal cycles of agricultural machinery operating in variable field environments.
  • The coolant change interval is set at 1000 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger structure means calendar time governs service timing even when annual operating hours remain low.
  • Hi-Level variants of the XM110, XM115 DCR, and XM125 DCR carry the same 21-liter cooling system capacity as their standard-cab counterparts, indicating the elevated cab configuration does not alter the engine cooling circuit volume.
  • DCR-designated models within the XM COM3 range, covering the XM115 DCR, XM115 Hi-Level DCR, XM125 DCR, and XM125 Hi-Level DCR, share the same 1000-hour or 24-month change interval as the non-DCR XM100 and XM110, despite the DCR suffix typically denoting a distinct emissions or engine management configuration.
  • Each configuration carries a serial number threshold in the format ZKDXXXXX, which defines the upper production boundary for which the listed cooling system specifications apply within the 2010-2016 model years.

Other Systems