Hürlimann XA V-DRIVE

Coolant capacity & service interval

Hürlimann XA V-DRIVE coolant capacity is 12 liters. Service intervals include checks at 10 hours and changes at 2400 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
XA 105 V-DRIVE, Stage 5->ZKDHU30200TH50001 (2022- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XA 115 V-DRIVE, Stage 5->ZKDHU40200TH50001 (2022- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XA 95 V-DRIVE, Stage 5->ZKDHU20200TH50001 (2022- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XA 100 V-DRIVE, Stage 3B->ZKDEU70200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XA 100.4 V-DRIVE, Stage 3B->ZKDEU70200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XA 110.4 V-DRIVE, Stage 3B->ZKDEV10200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XA 90 V-DRIVE, Stage 3B->ZKDET50200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
XA 90.4 V-DRIVE, Stage 3B->ZKDEU30200TH50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • The Hürlimann XA V-DRIVE cooling system capacity is 12 liters across all eight configurations listed, spanning the XA 90 through XA 115 variants. A 12-liter figure represents a full cooling system fill, accounting for the engine block, cylinder head passages, radiator, and associated hoses rather than a partial top-up volume.
  • The check interval of 10 hours applies uniformly under normal use conditions across all configurations. In agricultural machinery, a 10-hour check interval aligns closely with a daily inspection cycle, given that tractors in active field use commonly accumulate 8 to 12 operating hours per day.
  • The coolant change interval is set at 2400 hours or 24 months, whichever comes first, for all listed variants under normal use conditions. The dual-trigger structure means calendar time can mandate a change even when the hour threshold has not been reached, which is relevant for lower-utilization machines.
  • The Stage 3B configurations cover the XA 90, XA 90.4, XA 100, XA 100.4, and XA 110.4 variants, all introduced from 2019. Stage 3B refers to an EU emissions standard for non-road mobile machinery, representing a regulatory tier that preceded the more stringent Stage 5 requirements.
  • The Stage 5 configurations cover the XA 95, XA 105, and XA 115 variants, introduced from 2022. Stage 5 is the current EU emissions standard for non-road engines and imposes stricter limits on particulate number emissions compared to Stage 3B, often requiring additional aftertreatment hardware that can influence cooling system thermal loads.
  • Despite the difference in emissions stage between the 2019 Stage 3B and 2022 Stage 5 configurations, the cooling system capacity and service intervals are identical at 12 liters, 10-hour checks, and 2400-hour or 24-month changes. No variation in coolant specifications exists across the two emissions tiers within these rows.
  • Each configuration is identified by a serial number threshold, such as ZKDEU70200TH50001 for the XA 100 V-DRIVE Stage 3B. These serial number breakpoints define the exact production point from which the listed specifications apply, meaning units with earlier serial numbers fall outside the scope of these entries.

Other Systems