Hürlimann XA COM3

Manual transmission fluid capacity & service interval

Hürlimann XA COM3 manual transmission fluid capacity ranges from 35 to 41 liters. Service intervals include checking at 50 hours and changing at 1200 hours or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
XA 60, ->1001 (2010-2013)
  • Use: Normal
  • Capacity 41 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
XA 60, 1002->5001 (2010-2013)
  • Use: Normal
  • Capacity 41 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
XA 60 Tradition, ->10001 (2010-2013)
  • Use: Normal
  • Capacity 35 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Hürlimann XA COM3 manual transmission fluid capacity varies by variant, with the XA 60 Tradition (up to serial number 10001) holding 35 liters, while both XA 60 configurations hold 41 liters, representing a 6-liter difference between the Tradition and standard variants across the 2010-2013 model years.
  • A 41-liter manual transmission fluid capacity, as seen in the XA 60 variants, is a substantial fill volume consistent with large agricultural powershift or synchromesh transmissions found in high-horsepower tractors, where greater fluid volume supports thermal management and lubrication across multiple gear sets and wet clutch packs.
  • The 35-liter capacity of the XA 60 Tradition variant indicates a physically smaller or differently configured transmission housing compared to the standard XA 60, even though both share the same check and change intervals under normal use conditions.
  • All three configurations share a fluid level check interval of every 50 operating hours, which in agricultural equipment terms reflects a relatively frequent monitoring schedule suited to the demanding load cycles typical of tractor field work.
  • The fluid change interval across all XA COM3 variants is set at 1200 hours or 24 months, whichever comes first, meaning calendar time can trigger a service event even when the hour threshold has not been reached, as is common in seasonal or low-utilization applications.
  • The XA 60 serial number range split into two rows, up to 1001 and from 1002 to 5001, carries identical capacity and interval specifications of 41 liters, 50-hour checks, and 1200-hour or 24-month changes, indicating no mechanical revision to the transmission system between those production serial ranges within the 2010-2013 period.

Other Systems