Hürlimann XA

Power steering fluid capacity & service interval

Hürlimann XA uses power steering fluid with a capacity of 41 liters. Service intervals include checks every 300 hours and changes every 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • XA 655 (DT) (2000-2004)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 12 months
  • XA 656 (DT) (2000-2004)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 12 months
  • XA 657 (DT) (2000-2004)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 12 months
  • XA 658 (DT) (2000-2004)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 12 months

Additional Notes

  • The Hürlimann XA power steering fluid specification covers a shared system that also serves the transaxle and hydraulic system, meaning the 41-liter capacity reflects the total volume of a combined circuit rather than a standalone power steering reservoir.
  • All four variants in the XA 655 through XA 658 (DT) range carry an identical 41-liter capacity, indicating no variation in fluid volume across those configurations for the 2000-2004 model years.
  • The (DT) designation appearing across all four variants refers to a drivetrain configuration, and the uniform capacity across all of them suggests a consistent integrated hydraulic architecture regardless of the specific model number within the range.
  • A check interval of 300 hours is specified under normal use conditions, which in agricultural equipment terms corresponds to periodic inspection points tied to operational hours rather than calendar time alone.
  • The change interval is set at 12 months under normal use, establishing an annual fluid replacement cycle that runs independently of accumulated operating hours.
  • The combination of a 300-hour check interval alongside a 12-month change interval means fluid condition is monitored on an hours-based schedule while full replacement follows a fixed calendar period, whichever arrives first in practice.

Other Systems