Goldoni Star series

Coolant capacity & service interval

Goldoni Star series uses coolant with a capacity of 11 liters. Service intervals include checks every 10 hours and changes every 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Star 2070 (FH2070), VM D754
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 3050 (TP1/2/3/4/5/6/7/8), VM D703
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 3070 (TR1/2/3/4/5/6/7/8/9/10), VM D754
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 3070 (TUA1), VM D754
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 3070V (TUA1), VM D754
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 3070V (TUC4), VM D754
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 50 NRG (TP14), VM D703
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 70 NRG (TRA2), VM D704
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 75 Alto (TZA41/42/43/44/45/46/47/48), John Deere 3029TF
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Star 75 Basso (TZB41/42/43/44/45/46/47/48), John Deere 3029TF
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • All ten configurations in the Goldoni Star series covered here share a uniform cooling system capacity of 11 liters. In liquid-cooled tractor applications, a figure in this range is typical for a compact to mid-range agricultural engine, reflecting the total volume of the engine block passages, cylinder head galleries, and radiator combined.
  • The 10-hour check interval specified across every row corresponds to a very short inspection cycle, consistent with the demanding operating conditions of agricultural machinery where coolant level loss through minor seepage or thermal cycling can occur rapidly during field work.
  • A 24-month change interval applies uniformly to all configurations regardless of engine supplier. Calendar-based intervals of this length are standard for conventional ethylene glycol coolants, which degrade in corrosion inhibitor effectiveness over time even when the machine is not in continuous use.
  • The Star series draws on two distinct engine suppliers across the listed configurations. VM Motori units appear in the D703, D704, and D754 variants, while the Star 75 Alto and Star 75 Basso both use the John Deere 3029TF engine. Despite the difference in engine origin, the 11-liter cooling system capacity remains identical across all of them.
  • The VM D754 engine appears across the Star 2070, Star 3070, Star 3070V (TUA1), and Star 3070V (TUC4) configurations. The Star 3050 uses the VM D703, and the Star 70 NRG uses the VM D704, indicating a family of related VM Motori diesel units spanning the series.
  • The Star 3070 is represented by two distinct chassis codes: the TR series (TR1 through TR10) and the TUA1 variant. Both share the VM D754 engine and identical cooling system specifications, suggesting a common powertrain across different body or transmission configurations within the same model designation.
  • The Star 3070V appears in two separate chassis variants, TUA1 and TUC4, both paired with the VM D754 and both carrying the same 11-liter capacity and service intervals. The "V" designation in the model name typically denotes a vineyard or narrow-track configuration in European tractor nomenclature.
  • The Star 75 Alto and Star 75 Basso share the John Deere 3029TF engine and identical cooling specifications. The Alto and Basso designations in Italian refer to high-clearance and low-profile configurations respectively, representing orchard and row-crop variants built around the same drivetrain.

Other Systems