Goldoni Aster series

Coolant capacity & service interval

Goldoni Aster series coolant capacity ranges from 7 to 8,5 liters. Service intervals include a check every 10 hours and a change every 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Aster 35 (TX1A/TX1B/TX2A/TX2B), Lombardini LDW1503
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 24 months
Aster 40 (TX3A/TX3B/TX4A/TX4B), Lombardini LDW1603
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 24 months
Aster 45 (TX5A/TX6A), Lombardini LDW2204
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • The Goldoni Aster 35 and Aster 40 share an identical cooling system capacity of 7 liters, despite being paired with different Lombardini engines — the LDW1503 and LDW1603 respectively.
  • The Aster 45, fitted with the four-cylinder Lombardini LDW2204, carries a notably larger cooling system capacity of 8.5 liters, reflecting the greater displacement and thermal load of a four-cylinder configuration compared to the three-cylinder units in the smaller variants.
  • Across all three variants — the Aster 35, 40, and 45 — the coolant check interval is set at 10 hours of operation under normal use conditions, indicating a relatively frequent monitoring requirement typical of compact agricultural machinery subject to variable load cycles.
  • The coolant change interval of 24 months applies uniformly across the Aster 35, 40, and 45 under normal use conditions, meaning the replacement schedule is time-based rather than hour-based for all listed configurations.

Other Systems