Fiat-Trattori 90

Clutch fluid capacity & service interval

Fiat-Trattori 90 uses clutch fluid with a capacity of 0,37 liter. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
115-90, 115-90 DT (1984-1990)
  • Use: Normal
  • Capacity 0,37 liter
130-90 DT (1984-1990)
  • Use: Normal
  • Capacity 0,37 liter
140-90 DT (1984-1993)
  • Use: Normal
  • Capacity 0,37 liter
160-90 DT (1984-1993)
  • Use: Normal
  • Capacity 0,37 liter
180-90 DT (1984-1993)
  • Use: Normal
  • Capacity 0,37 liter

Additional Notes

  • The Fiat-Trattori 90 series clutch fluid capacity is rated at 0.37 liter across all five configurations covered in the specifications, applying to the hydraulic clutch system under normal use conditions.
  • A capacity figure of 0.37 liter is consistent with a hydraulic clutch circuit fill volume, representing the fluid held within the master cylinder reservoir, lines, and slave cylinder rather than a larger transmission or hydraulic system reservoir.
  • The 115-90 and 115-90 DT share the same 0.37 liter capacity as the heavier 130-90 DT, indicating the hydraulic clutch circuit volume does not scale with the power or weight differences between those variants.
  • The 140-90 DT, 160-90 DT, and 180-90 DT each carry the same 0.37 liter clutch fluid capacity, meaning the upper-tier models in the 90 series use an identically sized hydraulic clutch circuit to the lower-displacement variants.
  • The 115-90, 115-90 DT, and 130-90 DT specifications cover the 1984-1990 period, while the 140-90 DT, 160-90 DT, and 180-90 DT specifications extend through 1993, representing a longer production span for the higher-output models within the same series.
  • All five configurations are noted as hydraulic clutch systems, which distinguishes the clutch actuation from mechanical linkage designs and explains why a discrete fluid capacity figure is associated with each variant.

Other Systems