Fiat-Trattori 94

Coolant capacity & service interval

Fiat-Trattori 94 uses coolant with a capacity range of 14 to 16 liters. Service intervals occur every 1600 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
60-94, 60-94 DT (1993-1996)
  • Use: Normal
  • Capacity 14 liter
  • Change 1600 hours/ 24 months
65-94, 65-94 DT (1993-1996)
  • Use: Normal
  • Capacity 16 liter
  • Change 1600 hours/ 24 months
72-94, 72-94 DT (1993-1996)
  • Use: Normal
  • Capacity 16 liter
  • Change 1600 hours/ 24 months
82-94, 82-94 DT (1993-1996)
  • Use: Normal
  • Capacity 16 liter
  • Change 1600 hours/ 24 months
88-94, 88-94 DT (1993-1996)
  • Use: Normal
  • Capacity 16 liter
  • Change 1600 hours/ 24 months

Additional Notes

  • The Fiat-Trattori 94 series cooling system capacities split across two distinct values depending on the variant: the 60-94 and 60-94 DT hold 14 liters, while the 65-94, 72-94, 82-94, and 88-94 variants, including their DT counterparts, each hold 16 liters.
  • The 14-liter capacity of the 60-94 and 60-94 DT represents the smallest cooling system fill in the 94 series, reflecting a smaller engine displacement relative to the higher-numbered variants in the same lineup.
  • The 16-liter capacity shared across the 65-94 through 88-94 variants indicates a uniform cooling system volume across four different power ratings, suggesting a common engine block architecture among those configurations.
  • All five variants across the 1993-1996 production span carry an identical coolant change interval of 1,600 hours or 24 months under normal use conditions, whichever comes first.
  • The dual-format interval of 1,600 hours and 24 months reflects standard agricultural equipment service practice, where operating hours and calendar time are both tracked since seasonal or low-use machines may reach the time limit before the hour threshold.
  • The DT designation on each variant denotes a four-wheel-drive configuration, yet the cooling system capacity and change interval remain identical to the two-wheel-drive counterpart in every case across the 1993-1996 model years.
  • All specifications listed apply under normal use conditions, meaning the 1,600-hour and 24-month intervals are not adjusted for more demanding operating environments in the data provided for the 94 series.

Other Systems