Ferrari System series
Differential fluid capacity & service interval
Ferrari System series differential fluid capacity ranges from 4 to 6,5 liters. Service intervals include a check at 100 hours and a change at 600 hours. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Service intervals across all six configurations are expressed in operating hours rather than distance or calendar time, which is standard practice for agricultural and industrial machinery where annual mileage figures are not a meaningful measure of wear.
- All configurations share identical service intervals: a fluid level check every 100 hours and a full fluid change every 600 hours. A 600-hour change interval means the differential fluid is replaced once for every six inspection points.
- The Ferrari System 40 AR and System 50L AR, both covering 1998-2002, carry a front differential fluid capacity of 6.5 liters. This is the largest capacity figure across all listed configurations, reflecting a physically larger differential housing associated with the AR designation.
- The System 40 RS and System 50L RS configurations hold 5 liters of front differential fluid. The RS variants therefore require 1.5 liters less fluid than their AR counterparts within the same model families, indicating a difference in differential size or design between the two designations.
- The System 50 (RS/MT) and System 70 (RS/MT), which both span 1995-2002, share an identical front differential fluid capacity of 4 liters. This is the smallest capacity value in the listed specifications, and the shared figure across two different model sizes suggests a common differential unit used in both configurations.
- The AR-designated variants, System 40 AR and System 50L AR, were introduced in 1998, while the RS/MT variants of the System 50 and System 70 trace back to 1995. The three-year earlier start date for the RS/MT configurations reflects a longer production run within the 1995-2002 window covered by these specifications.