Ferrari System series

Coolant capacity & service interval

Ferrari System series coolant capacity ranges from 3,7 to 8,5 liters. Service intervals include a 10 hour check and a 1000 hour change. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
System 40 AR (1998-2002)
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 1000 hours
System 40 RS (1998-2002)
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 1000 hours
System 50L AR (1998-2002)
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 1000 hours
System 50L RS (1998-2002)
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 1000 hours
System 50 (RS/MT) (1995-2002)
  • Use: Normal
  • Capacity 3,7 liter
  • Check 10 hours
  • Change 1000 hours
System 70 (RS/MT) (1995-2002)
  • Use: Normal
  • Capacity 3,7 liter
  • Check 10 hours
  • Change 1000 hours

Additional Notes

  • The Ferrari System series coolant service intervals are expressed in operating hours rather than calendar time or distance, which is standard practice for agricultural and industrial machinery where annual usage varies widely between operators.
  • The System 40 AR and System 40 RS, both covering 1998-2002, share an identical cooling system capacity of 8.5 liters, indicating a common engine cooling architecture between the AR (automatic) and RS transmission variants within the 40-series.
  • The System 50 (RS/MT), spanning 1995-2002, carries a notably smaller cooling system capacity of 3.7 liters compared to the 8.5-liter figure seen in the System 50L AR and System 50L RS. The "L" designation in the 50L variants appears to correspond with a significantly larger cooling circuit.
  • The System 70 (RS/MT), also covering 1995-2002, shares the 3.7-liter capacity of the System 50 (RS/MT), suggesting a similar or shared cooling system layout between these two non-L variants despite their different power ratings.
  • The 10-hour check interval applies uniformly across all six configurations under normal use conditions. In hour-based service schedules, a 10-hour interval represents a very frequent inspection point, consistent with early operational monitoring during a working season.
  • The 1000-hour coolant change interval is consistent across all listed configurations. At typical agricultural machinery usage rates, 1000 operating hours can represent several seasons of field work, making the change interval a long-cycle service event rather than a routine seasonal task.
  • The System 50L AR and System 50L RS, introduced in 1998, align with the same 8.5-liter capacity as the System 40 AR and System 40 RS from the same period, pointing to a shared cooling system design across the AR and RS variants of both the 40 and 50L series.

Other Systems