Fendt RoGator
Coolant capacity & service interval
Fendt RoGator coolant capacity is 29 liters. Service intervals include checks at 10 hours and changes at 1000 hours or 24 months and 2000 hours or 24 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Rogator 645, Stage V (2020- ) |
|
| Rogator 655, Stage V (2020- ) |
|
| Rogator 665, Stage V (2020- ) |
|
| Rogator 635, Tier 4F (2016- ) |
|
| Rogator 645, Tier 4F (2016- ) |
|
| Rogator 655, Tier 4F (2016- ) |
|
Additional Notes
- The Fendt RoGator cooling system capacity is 29 liters across all six configurations listed, covering the 635, 645, 655, and 665 model variants in both Tier 4F and Stage V emissions standards. A uniform capacity across these variants points to a shared engine cooling architecture rather than model-specific cooling circuit sizing.
- All configurations specify a coolant level check interval of 10 hours, which is among the most frequent service checks in agricultural equipment maintenance schedules. An interval this short reflects the operational demands placed on cooling systems in high-load sprayer applications.
- Tier 4F variants of the RoGator 635, 645, and 655 share a coolant change interval of 1000 hours or 24 months, whichever comes first. The dual-trigger structure means time elapsed can mandate a change even when hour accumulation is low, as in seasonal or low-utilization operation.
- Stage V variants of the RoGator 645, 655, and 665 carry a coolant change interval of 2000 hours or 24 months. The hour-based threshold is double that of the Tier 4F counterparts, while the calendar-based threshold of 24 months remains identical across both emissions standards.
- The difference in hour-based change intervals between Tier 4F and Stage V configurations — 1000 hours versus 2000 hours — reflects advances in coolant formulation compatibility or engine thermal management associated with the Stage V emissions standard, rather than any difference in cooling system volume.
- The 29-liter capacity figure represents the full cooling system fill, encompassing the engine block, cylinder head passages, radiator, and associated hoses and reservoir. In service contexts, the actual drain-and-refill volume may be slightly less depending on residual fluid retention in the system.
- Stage V emissions regulations, which apply to the 645, 655, and 665 variants introduced from 2020, generally require more sophisticated aftertreatment systems than Tier 4F. The extended coolant service interval on Stage V models may relate to the thermal management requirements of those aftertreatment components operating within tighter temperature tolerances.