Fendt IDEAL

Transfer case fluid capacity & service interval

Fendt IDEAL transfer case fluid capacity ranges from 6,9 to 9,9 liters. Service intervals occur every 500 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
IDEAL 10/T (2018- )
  • Use: Normal
  • Capacity 9,9 liter (Dry fill)
  • Capacity 6,9 liter (Service fill)
  • Change 500 hours/ 12 months
  • Code: DriveCenter
IDEAL 7/PL/T (2018- )
  • Use: Normal
  • Capacity 9,9 liter (Dry fill)
  • Capacity 6,9 liter (Service fill)
  • Change 500 hours/ 12 months
  • Code: DriveCenter
IDEAL 8/PL/T (2018- )
  • Use: Normal
  • Capacity 9,9 liter (Dry fill)
  • Capacity 6,9 liter (Service fill)
  • Change 500 hours/ 12 months
  • Code: DriveCenter
IDEAL 9/PL/T (2018- )
  • Use: Normal
  • Capacity 9,9 liter (Dry fill)
  • Capacity 6,9 liter (Service fill)
  • Change 500 hours/ 12 months
  • Code: DriveCenter

Additional Notes

  • The Fendt IDEAL transfer case (transferbox) carries a dry fill capacity of 9.9 liters, which represents the total fluid volume required when filling a completely drained or newly assembled unit from empty.
  • The service fill capacity is 6.9 liters, reflecting the smaller volume needed during a routine fluid change where residual fluid remains in the housing after draining.
  • The difference between the 9.9-liter dry fill and the 6.9-liter service fill amounts to 3.0 liters, indicating the volume of fluid that typically stays retained in the transferbox after a standard drain procedure.
  • The IDEAL 10/T, IDEAL 7/PL/T, IDEAL 8/PL/T, and IDEAL 9/PL/T configurations from 2018 onward all share identical transfer case capacities and change intervals, with no variation across the four variants in the specifications.
  • The fluid change interval for all four configurations is set at 500 hours or 12 months under normal use conditions, meaning whichever threshold is reached first would trigger a service event.
  • A 500-hour interval on agricultural harvesting equipment such as the Fendt IDEAL reflects the relatively intensive operating cycles typical of combine harvesters, where seasonal workloads can accumulate hours rapidly compared to general-purpose vehicles.

Other Systems