Fendt IDEAL
Coolant capacity & service interval
Fendt IDEAL coolant capacity is 64 liter. Service intervals require a change every 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| IDEAL 10/T (2018- ) |
|
| IDEAL 7/PL/T (2018- ) |
|
| IDEAL 8/PL/T (2018- ) |
|
| IDEAL 9/PL/T (2018- ) |
|
Additional Notes
- The Fendt IDEAL cooling system capacity is 64 liters across the IDEAL 7, 8, 9, and 10 variants, covering PL and T configurations alike. A 64-liter figure is substantial even by large agricultural machinery standards, reflecting the scale of the engine cooling demands in a combine harvester of this class.
- The PL and T body variants of the IDEAL 7, IDEAL 8, and IDEAL 9 all share an identical 64-liter cooling system capacity, indicating no differentiation in cooling system volume between those two configuration types within each model number.
- The IDEAL 10 T carries the same 64-liter cooling system capacity as the lower-numbered IDEAL variants, meaning the step up in model designation does not correspond to a change in coolant volume for the cooling system.
- All four IDEAL variants specify a 24-month change interval under normal use conditions. A time-based interval of 24 months is common for modern extended-life coolants, where degradation of corrosion inhibitors over time is the primary driver of the service schedule rather than operating hours alone.
- The 24-month coolant change interval applies uniformly across the IDEAL 7, 8, 9, and 10 regardless of the PL or T configuration, with no variation in service timing tied to body type or model tier within the IDEAL lineup as specified.