Fendt Favorit 800

Manual transmission fluid capacity & service interval

Fendt Favorit 800 requires manual transmission fluid with a capacity of 64 liter. Service intervals occur every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Favorit 816 Turbo, 816/../0001 -> (1993-2002)
  • Use: Normal
  • Capacity 64 liter
  • Change 2000 hours/ 24 months
  • Code: 44/44
Favorit 818 Turbo, 818/../0001 -> (1993-2002)
  • Use: Normal
  • Capacity 64 liter
  • Change 2000 hours/ 24 months
  • Code: 44/44
Favorit 822 Turbo, 822/../0001 -> (1993-2002)
  • Use: Normal
  • Capacity 64 liter
  • Change 2000 hours/ 24 months
  • Code: 44/44
Favorit 824 Turbo, 824/../0001 -> (1993-2002)
  • Use: Normal
  • Capacity 64 liter
  • Change 2000 hours/ 24 months
  • Code: 44/44

Additional Notes

  • The Fendt Favorit 800 series manual transaxle carries a fluid capacity of 64 liters across the 816 Turbo, 818 Turbo, 822 Turbo, and 824 Turbo variants. A capacity at this scale is characteristic of an integrated transaxle housing that combines the transmission and axle differential into a single shared fluid reservoir, rather than separate sealed units.
  • The 64-liter figure represents a service fill volume, meaning the quantity of fluid required during a standard drain-and-refill service rather than a complete overhaul or dry-build fill, which would typically account for additional passages and galleries not fully evacuated during a normal drain.
  • The fluid change interval is specified at 2000 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger format means a tractor accumulating low annual hours would still reach the calendar threshold before the hour threshold, and vice versa for high-utilization machines.
  • All four variants in the 1993-2002 range share an identical 64-liter capacity and the same 2000-hour/24-month change interval, indicating no differentiation in transaxle specification between the 816, 818, 822, and 824 model designations within the Favorit 800 series.
  • The serial number notation for each variant begins at 0001 with a starting year of 1993, establishing the production entry point for the transaxle specification as recorded. The 816 Turbo, 818 Turbo, 822 Turbo, and 824 Turbo all share the same serial number format structure.
  • The transaxle classification as manual in the notes distinguishes the fluid and service requirements from those of a powershift or continuously variable transmission, both of which typically involve different fluid types, capacities, and more frequent change intervals due to higher operating pressures and heat generation.

Other Systems