Fendt Favorit 700

Coolant capacity & service interval

Fendt Favorit 700 uses coolant with a capacity of 18 liters. Service intervals include checks at 10 hours and 250 hours, with changes required at 2000 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Favorit 711 Vario, 711/../5001 -> 711/../8000 (2002-2004)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Favorit 712 Vario, 712/../5001 -> 712/../8000 (2002-2004)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Favorit 714 Vario, 714/../5001 -> 714/../8000 (2002-2004)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Favorit 716 Vario, 716/../5001 -> 716/../8000 (2002-2004)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Favorit 711 Vario, 711/../0001 -> 711/../5000 (2000-2001)
  • Use: Normal
  • Capacity 18 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Favorit 712 Vario, 712/../0001 -> 712/../5000 (2000-2001)
  • Use: Normal
  • Capacity 18 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Favorit 714 Vario, 714/../0001 -> 714/../5000 (1999-2001)
  • Use: Normal
  • Capacity 18 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Favorit 716 Vario, 716/../0001 -> 716/../5000 (1999-2001)
  • Use: Normal
  • Capacity 18 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Fendt Favorit 700 series cooling system capacity is 18 liters across all four Vario variants — the 711, 712, 714, and 716 — and across all serial number ranges covered by these specifications. An 18-liter figure is consistent with a mid-to-large agricultural tractor cooling circuit, accounting for the engine block, cylinder head passages, radiator volume, and associated hoses.
  • All eight rows share an identical coolant change interval of 2000 hours or 24 months, whichever comes first. The dual-trigger structure means calendar time can mandate a change even when the hour threshold has not been reached, which is relevant for machines used in lower-intensity seasonal applications.
  • A clear split in the coolant check interval exists between earlier and later serial number ranges. Units with serial numbers ending in 0001 through 5000, covering model years 1999-2001 for the 714 and 716 Vario and 2000-2001 for the 711 and 712 Vario, carry a 250-hour check interval.
  • Units with serial numbers ending in 5001 through 8000, covering model years 2002-2004 across all four Vario variants, specify a 10-hour coolant check interval. A 10-hour interval corresponds roughly to daily or every-other-day checks during active use, indicating a significantly more frequent monitoring requirement than the earlier production range.
  • The reduction from a 250-hour to a 10-hour check interval between the two serial number ranges represents a 96 percent decrease in the time between inspections. This kind of revision within a production run typically reflects updated service guidance issued after field experience with the earlier units.
  • Despite the change in check frequency, the coolant capacity of 18 liters and the change interval of 2000 hours or 24 months remain unchanged between the two serial number ranges, indicating the revision applied specifically to monitoring frequency rather than to fluid volume or replacement timing.
  • The 714 Vario and 716 Vario have an earlier production start within these specifications, with their first serial number range beginning in 1999, one year ahead of the 711 and 712 Vario ranges, which begin in 2000. All four variants share the same 2004 end point for the later serial number range.

Other Systems