Fendt Favorit 700

Brake fluid capacity & service interval

Fendt Favorit 700 requires 0,8 liter of brake fluid. Service intervals include checking every 500 hours and changing every 2000 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Favorit 711 Vario, 711/../5001 -> 711/../8000 (2002-2004)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
Favorit 712 Vario, 712/../5001 -> 712/../8000 (2002-2004)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
Favorit 714 Vario, 714/../5001 -> 714/../8000 (2002-2004)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
Favorit 716 Vario, 716/../5001 -> 716/../8000 (2002-2004)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
Favorit 711 Vario, 711/../0001 -> 711/../5000 (2000-2001)
  • Use: Normal
  • Capacity 0,8 liter
  • Change 2000 hours/ 24 months
Favorit 712 Vario, 712/../0001 -> 712/../5000 (2000-2001)
  • Use: Normal
  • Capacity 0,8 liter
  • Change 2000 hours/ 24 months
Favorit 714 Vario, 714/../0001 -> 714/../5000 (1999-2001)
  • Use: Normal
  • Capacity 0,8 liter
  • Change 2000 hours/ 24 months
Favorit 716 Vario, 716/../0001 -> 716/../5000 (1999-2001)
  • Use: Normal
  • Capacity 0,8 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • The Fendt Favorit 700 series hydraulic brake/clutch system holds 0.8 liter of brake fluid across all listed variants, including the 711, 712, 714, and 716 Vario models. A consistent capacity across all serial number ranges and model years indicates a shared hydraulic system architecture throughout the lineup.
  • All listed variants share a change interval of 2000 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format, combining an operating hour threshold with a calendar limit, reflects the hygroscopic nature of brake fluid, which absorbs moisture over time regardless of machine usage.
  • Serial number ranges ending at 5000 (covering production years 1999-2001 for the 714 and 716 Vario, and 2000-2001 for the 711 and 712 Vario) carry no intermediate inspection interval. The change interval of 2000 hours or 24 months stands as the sole scheduled service action for those builds.
  • Serial number ranges beginning at 5001 (covering 2002-2004 across all four Vario variants) introduce an additional 500-hour fluid check interval not present in the earlier builds. A check at 500 hours typically involves inspecting fluid level and condition without a full drain and refill.
  • The addition of the 500-hour check in the later serial number ranges represents a revision to the service schedule between production batches. The change and capacity values remain identical, so the revision affects inspection frequency rather than fluid volume or replacement timing.
  • The 714 and 716 Vario models in their early serial number range (0001 to 5000) began production in 1999, one year ahead of the 711 and 712 Vario equivalents, which entered the same serial range in 2000. Despite the staggered introduction, all four models converge on the same specifications within their respective serial number bands.

Other Systems