Fendt Favorit 500 C

Differential fluid capacity & service interval

Fendt Favorit 500 C differential fluid capacity is 7 liters. Service intervals include checking every 500 hours and changing every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Favorit 511 C, 511/../0001 -> (1995-1999)
  • Front
  • Use: Normal
  • Capacity 7 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • Favorit 515 C (1995-1999)
  • Front
  • Use: Normal
  • Capacity 7 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • Favorit 509 C, 509/../0001 -> (1993-1999)
  • Front
  • Use: Normal
  • Capacity 7 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • Favorit 510 C, 510/../0001 -> (1993-1999)
  • Front
  • Use: Normal
  • Capacity 7 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • Favorit 512 C, 512/../0001 -> (1993-1999)
  • Front
  • Use: Normal
  • Capacity 7 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • Favorit 514 C, 514/../0001 -> (1993-1999)
  • Front
  • Use: Normal
  • Capacity 7 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)

Additional Notes

  • All six variants within the Fendt Favorit 500 C range share an identical front differential fluid capacity of 7 liters, indicating a common front axle assembly across the lineup regardless of model designation.
  • The Favorit 509 C, 510 C, 512 C, and 514 C carry production serial ranges beginning in 1993, while the Favorit 511 C and 515 C have starting years of 1995, placing them as later additions within the same generation.
  • A 7-liter front differential capacity is relatively substantial for a tractor front axle, reflecting the heavy-duty construction typical of agricultural differentials designed to handle significant torque loads under field conditions.
  • The check interval is set at 500 hours under normal use conditions, which in agricultural equipment terms represents a mid-season inspection point for operators running high annual hours.
  • The fluid change interval is specified as 1000 hours or 12 months, whichever comes first. The dual-trigger format means calendar time governs the interval even when operating hours remain low, accounting for fluid degradation over time independent of use.
  • The change interval of 1000 hours is exactly double the check interval of 500 hours, meaning a fluid level or condition check falls precisely at the midpoint between each full drain-and-fill service.
  • All six models carry a normal use condition designation for these front differential specifications, meaning the stated intervals apply to standard agricultural operating environments rather than elevated-stress or severe-duty conditions.

Other Systems