Fendt Farmer 300 C

Coolant capacity & service interval

Fendt Farmer 300 C requires coolant with a capacity of 13 liters. Service intervals include checks at 10 hours and 250 hours, and changes at 24 months or 2000 hours. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Farmer 307 Ci, 117/../8001 -> (2004-2008)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Farmer 308 Ci, 118/../8001 -> (2004-2008)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Farmer 309 Ci, 119/../8001 -> (2004-2008)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Farmer 307 C, 117/../0001 -> 117/../5000 (1998-2001)
  • Use: Normal
  • Capacity 13 liter
  • Check 250 hours
  • Change 24 months
Farmer 307 C, 117/../5001 -> (1998-2001)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Farmer 308 C, 118/../0001 -> 118/../5000 (1998-2001)
  • Use: Normal
  • Capacity 13 liter
  • Check 250 hours
  • Change 24 months
Farmer 308 C, 118/../5001 -> (1998-2001)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Farmer 309 C, 119/../0001 -> 119/../5000 (1998-2001)
  • Use: Normal
  • Capacity 13 liter
  • Check 250 hours
  • Change 24 months
Farmer 309 C, 119/../5001 -> (1998-2001)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Fendt Farmer 300 C cooling system capacity is 13 liters across all listed variants, covering the 307 C, 308 C, and 309 C model lines. A consistent capacity across different engine displacements in the same family typically reflects a shared cooling circuit architecture rather than engine-specific sizing.
  • Early serial number units of the 307 C, 308 C, and 309 C, specifically those within the 0001 to 5000 serial range produced in 1998-2001, carry a coolant check interval of 250 hours. This longer check interval contrasts with the 10-hour interval applied to later serial numbers in the same production years.
  • From serial number 5001 onward in the 1998-2001 production units, the coolant check interval drops to 10 hours. A 10-hour check interval is characteristic of a more frequent visual or level inspection routine, often tied to revised maintenance schedules introduced mid-production run.
  • The early 0001-5000 serial range units specify a coolant change interval of 24 months with no accompanying hour-based threshold. A calendar-only interval indicates that time-based coolant degradation was the primary concern for those units, independent of machine usage levels.
  • Later 1998-2001 units from serial 5001 onward, as well as all Ci variants from 2004-2008, specify a dual change interval of 2000 hours or 24 months, whichever comes first. The dual-threshold approach accounts for both high-use machines that accumulate hours quickly and lower-use machines where calendar aging of the coolant becomes the limiting factor.
  • The 307 Ci, 308 Ci, and 309 Ci variants, identified by serial numbers from 8001 onward and produced in 2004-2008, share identical coolant specifications with the post-5000 serial 1998-2001 units: 13 liters capacity, 10-hour checks, and a 2000-hour or 24-month change interval. The "i" designation in the model name typically denotes an intercooled engine variant.
  • The serial number structure used across these variants, such as 117/../0001, encodes model-specific identifiers in the prefix digits, with the sequential number following. The shift in maintenance specifications at the 5000 serial boundary within the 1998-2001 production period reflects a mid-run revision rather than a model year change.

Other Systems