Fendt Farmer 100

Transfer case fluid capacity & service interval

Fendt Farmer 100 transfer case fluid capacity is 5,7 liters. Service intervals include checking every 100 or 250 hours and changing every 1000 hours or 12 to 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Farmer 102 S, SA (1985-1992)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months
Farmer 103 S, SA (1985-1992)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months
Farmer 102 S, SA (1977-1985)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Farmer 103 S, SA (1977-1985)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Farmer 104 S, SA (1977-1982)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Farmer 105 S, SA (1977-1982)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Farmer 106 S, SA (1977-1982)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Farmer 108 S, SA (1977-1982)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The Fendt Farmer 100 series transfer case, referred to in the specifications as a transferbox, holds a uniform fluid capacity of 5.7 liters across all listed variants, from the Farmer 102 through the Farmer 108. A consistent capacity across multiple models in a series typically reflects a shared drivetrain housing design rather than model-specific engineering differences.
  • The Farmer 102 S and SA, along with the Farmer 103 S and SA, each appear in two distinct specification sets divided at 1985, while the Farmer 104, 105, 106, and 108 variants carry a single specification set covering 1977-1982. The 1985 boundary marks a meaningful shift in service interval requirements for the 102 and 103 variants.
  • For the Farmer 102 S, SA and Farmer 103 S, SA built between 1977-1985, the transferbox fluid check interval is set at 100 hours under normal use conditions. The 1985-1992 versions of the same models extend the check interval to 250 hours, also under normal use conditions, indicating a revision in service requirements between the two production periods.
  • The fluid change interval for the Farmer 102 S, SA and Farmer 103 S, SA from 1977-1985 is specified as 1000 hours or 12 months, whichever comes first. The 1985-1992 versions extend the calendar-based component of that interval to 24 months, while retaining the 1000-hour threshold. The extended calendar interval suggests a reassessment of fluid degradation rates over time for the later production versions.
  • All Farmer 104, 105, 106, and 108 S and SA variants covered in the specifications share identical transferbox service intervals: a fluid check at 100 hours and a fluid change at 1000 hours or 12 months under normal use conditions. The 5.7-liter capacity applies uniformly across all four of these variants as well.
  • A 1000-hour change interval for a transfer case in agricultural equipment reflects the heavy-duty, time-based nature of tractor service schedules, where operating hours accumulate unevenly across seasons. The parallel 12-month or 24-month calendar limit ensures fluid is changed even when annual operating hours remain low.

Other Systems