Fendt 700 Vario Gen7

Differential fluid capacity & service interval

Fendt 700 Vario Gen7 differential fluid capacity ranges from 7 to 9,6 liters. Service intervals occur every 1000 hours or 12 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 720 Vario, Agco Power AP75 FSTN (2022- )
  • Front
  • Use: Normal
  • Capacity 8,65-9,6 liter (Dry fill)
  • Capacity 7-7,9 liter (Service fill)
  • Change 1000 hours/ 12 months
  • 722 Vario, Agco Power AP75 FSTN (2022- )
  • Front
  • Use: Normal
  • Capacity 8,65-9,6 liter (Dry fill)
  • Capacity 7-7,9 liter (Service fill)
  • Change 1000 hours/ 12 months
  • 724 Vario, Agco Power AP75 FSTN (2022- )
  • Front
  • Use: Normal
  • Capacity 8,65-9,6 liter (Dry fill)
  • Capacity 7-7,9 liter (Service fill)
  • Change 1000 hours/ 12 months
  • 726 Vario, Agco Power AP75 FSTN (2022- )
  • Front
  • Use: Normal
  • Capacity 8,65-9,6 liter (Dry fill)
  • Capacity 7-7,9 liter (Service fill)
  • Change 1000 hours/ 12 months
  • 728 Vario, Agco Power AP75 FSTN (2022- )
  • Front
  • Use: Normal
  • Capacity 8,65-9,6 liter (Dry fill)
  • Capacity 7-7,9 liter (Service fill)
  • Change 1000 hours/ 12 months

Additional Notes

  • The Fendt 700 Vario Gen7 front differential dry fill capacity ranges from 8.65 to 9.6 liters across the 720, 722, 724, 726, and 728 Vario variants. A dry fill figure represents the total fluid volume required when filling a completely drained or newly assembled differential with no residual fluid present.
  • The service fill capacity for the front differential sits between 7 and 7.9 liters across all five variants. A service fill is the lower volume needed during a routine fluid change, where some fluid remains in passages and cavities even after draining.
  • The gap between the dry fill range (8.65-9.6 L) and the service fill range (7-7.9 L) amounts to roughly 1.65 to 1.7 liters. This difference reflects the residual fluid that stays in the differential housing during a standard drain procedure.
  • All five variants share an identical front differential fluid change interval of 1,000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger structure means the calendar limit applies even when the hour threshold has not been reached.
  • The 720, 722, 724, 726, and 728 Vario models all use the Agco Power AP75 FSTN engine and carry the same front differential capacity values and service interval. No variation in differential fluid specifications exists across the five engine-model combinations listed.

Other Systems