Fendt 700 Vario Gen7

Coolant capacity & service interval

Fendt 700 Vario Gen7 uses coolant with a capacity of 35 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
720 Vario, Agco Power AP75 FSTN (2022- )
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
722 Vario, Agco Power AP75 FSTN (2022- )
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
724 Vario, Agco Power AP75 FSTN (2022- )
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
726 Vario, Agco Power AP75 FSTN (2022- )
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
728 Vario, Agco Power AP75 FSTN (2022- )
  • Use: Normal
  • Capacity 35 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Fendt 700 Vario Gen7 cooling system holds 35 liters across all five variants covered in the specifications, namely the 720, 722, 724, 726, and 728 Vario.
  • A 35-liter coolant capacity is consistent with a large-displacement agricultural tractor engine, where the cooling circuit must manage sustained high thermal loads across extended field operations.
  • All five variants share the Agco Power AP75 FSTN engine, introduced from 2022, and each carries an identical 35-liter cooling system capacity, indicating a common cooling architecture across the range.
  • The coolant level check interval is set at 10 hours under normal use conditions, which aligns with a pre-shift or daily inspection routine typical of professional agricultural equipment.
  • The coolant change interval is specified at 2000 hours or 24 months under normal use conditions, whichever comes first, meaning calendar time can trigger a service event even when machine hours remain below the threshold.
  • The dual-trigger change interval of 2000 hours and 24 months reflects the degradation behavior of modern coolant formulations, which deteriorate through both thermal cycling and chemical aging over time regardless of operating hours accumulated.
  • Because the capacity and service intervals are identical across the 720, 722, 724, 726, and 728 Vario, a single coolant service procedure and fill quantity applies uniformly to all five models sharing the AP75 FSTN engine.

Other Systems