Fendt 500 Xylon

Brake fluid capacity & service interval

Fendt 500 Xylon uses brake fluid with a capacity of 1,1 liters. Service intervals include checks at 500 hours and changes at 2000 hours or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Xylon 520, 520/../0001 -> (1995-2004)
  • Use: Normal
  • Capacity 1,1 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
Xylon 522, 522/../0001 -> (1995-2004)
  • Use: Normal
  • Capacity 1,1 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
Xylon 524, 524/../0001 -> (1995-2004)
  • Use: Normal
  • Capacity 1,1 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Fendt 500 Xylon hydraulic brake/clutch system holds 1.1 liters of brake fluid across the Xylon 520, 522, and 524 variants, a capacity consistent with a combined hydraulic circuit serving both braking and clutch actuation from a shared reservoir.
  • A check interval of 500 hours applies to the hydraulic brake/clutch system on all three variants, meaning fluid level and condition are inspected well before a full change is due.
  • The change interval is set at 2000 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure accounts for time-based fluid degradation, since brake fluid absorbs moisture over time regardless of operational hours accumulated.
  • The Xylon 520, 522, and 524 share identical capacity and interval specifications for the hydraulic brake/clutch system, with no variation in fluid volume or service timing across the three models for the 1995-2004 production range.

Other Systems