Fendt 400 COM1/2

Brake fluid capacity & service interval

Fendt 400 COM1/2 requires 0,8 liter of brake fluid. Service intervals include checks every 500 hours and fluid changes every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
409 Vario (2003-2007)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
410 Vario (2003-2007)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
411 Vario (2003-2007)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
412 Vario (2003-2007)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Fendt 400 COM1/2 series covers the 409, 410, 411, and 412 Vario models from 2003-2007, all sharing identical brake fluid specifications across the range.
  • Each model in the 2003-2007 lineup specifies a hydraulic brake/clutch system capacity of 0.8 liter, which represents the service fill volume for that combined circuit.
  • A check interval of every 500 hours is specified under normal use conditions, meaning the fluid level and condition are to be inspected at that frequency without a full fluid exchange.
  • The change interval is set at 2000 hours or 24 months, whichever comes first, reflecting a dual time-and-hours threshold common in agricultural equipment servicing where seasonal use patterns vary.
  • The 24-month calendar limit on fluid changes acknowledges that brake fluid absorbs moisture over time regardless of operational hours, making calendar-based replacement relevant even on lower-use machines.
  • The 409, 410, 411, and 412 Vario models share a single hydraulic circuit serving both the brake and clutch systems, which is why the 0.8 liter capacity figure applies to both functions together rather than separately.

Other Systems