Fendt 400 COM3

Brake fluid capacity & service interval

Fendt 400 COM3 uses brake fluid with a capacity of 0,8 liter. Service intervals include checking at 500 hours and changing at 2000 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
411 Vario (2007-2012)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
412 Vario (2007-2012)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
413 Vario (2007-2012)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
414 Vario (2007-2012)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
415 Vario (2007-2012)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • All five Fendt 400 COM3 variants covered here — the 411, 412, 413, 414, and 415 Vario — share an identical hydraulic brake/clutch system capacity of 0.8 liter, indicating a unified system design across the entire model range for the 2007-2012 period.
  • The 0.8 liter figure represents a service fill capacity, meaning the volume required to maintain or refill the hydraulic brake/clutch system during routine servicing rather than a full overhaul quantity.
  • A check interval of every 500 hours applies uniformly across the 411-415 Vario models, reflecting a periodic inspection point well ahead of the full fluid change interval.
  • The change interval is specified at 2000 hours or 24 months, whichever comes first, meaning time elapsed can trigger a fluid change even when the hourly threshold has not been reached — a common dual-condition structure in agricultural equipment servicing.
  • All specifications across the 411-415 Vario are designated for normal use conditions, meaning the 500-hour check and 2000-hour/24-month change intervals are not adjusted for any alternative operating severity.
  • The hydraulic brake/clutch system designation indicates that brake and clutch actuation share a single fluid circuit, so the 0.8 liter capacity and associated service intervals apply to both functions simultaneously.

Other Systems