Fendt 1000 Vario gen2
Differential fluid capacity & service interval
Fendt 1000 Vario gen2 differential fluid capacity ranges from 14,3 to 18,5 liters. Service intervals occur every 1000 hours or 12 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The Fendt 1000 Vario gen2 front differential carries an initial fill capacity of 18.5 liters, a figure that reflects the total volume required when filling a dry or overhauled unit from empty.
- The service fill capacity is listed at 14.3 liters, representing the smaller volume needed during a routine fluid change where residual fluid remains in the housing after draining.
- The gap between the 18.5-liter initial fill and the 14.3-liter service fill amounts to 4.2 liters, indicating a notable volume of fluid that does not drain during a standard service procedure.
- The front differential fluid change interval under normal use conditions is set at 1000 hours or 12 months, whichever comes first, applying a dual threshold that accounts for both operational intensity and calendar time.
- All four variants covered by serial number designations WAM536, WAM537, WAM538, and WAM539, corresponding to the 1038, 1042, 1046, and 1050 Vario models from 2020 onward, share identical front differential capacity and interval specifications.