Fendt 1000 Vario gen2

Coolant capacity & service interval

Fendt 1000 Vario gen2 uses coolant with a capacity of 80 to 85 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
1038 Vario, WAM536 -> (2020- )
  • Use: Normal
  • Capacity 80-85 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
1042 Vario, WAM537 -> (2020- )
  • Use: Normal
  • Capacity 80-85 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
1046 Vario, WAM538 -> (2020- )
  • Use: Normal
  • Capacity 80-85 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
1050 Vario, WAM539 -> (2020- )
  • Use: Normal
  • Capacity 80-85 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Fendt 1000 Vario gen2 cooling system capacity is listed as a range of 80 to 85 liters across all four variants, which reflects normal variation during a service fill depending on residual fluid and system state rather than a fixed single-point volume.
  • The 1038 Vario (WAM536), 1042 Vario (WAM537), 1046 Vario (WAM538), and 1050 Vario (WAM539) all share an identical capacity range of 80 to 85 liters, indicating no meaningful difference in cooling system volume across the power variants within the 2020 generation.
  • Coolant checks are specified at every 10 hours of operation, a notably short interval that reflects the high thermal loads typical of large agricultural powerplants and the importance of catching low coolant levels before engine damage occurs.
  • The coolant change interval is set at 2000 hours or 24 months, whichever comes first, meaning calendar time can trigger a change even when the hour threshold has not been reached in lower-utilization applications.
  • All four variants carry the same 2000-hour or 24-month change interval under normal use conditions, with no differentiation in service frequency tied to the differing power outputs of the 1038, 1042, 1046, and 1050 designations.

Other Systems