Deutz-Fahr Series 6 W Profi

Coolant capacity & service interval

Deutz-Fahr Series 6 W Profi coolant capacity ranges from 16 to 24,1 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
6130 W Profi, ->DF1DU902W0CD10001 (2020- )
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6135 W Profi PS, ->DF1GK202W0CD10001 (2020- )
  • Use: Normal
  • Capacity 24,1 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6145 W Profi, ->DF1DT802W0CD1000 (2020- )
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6155 W Profi PS, ->DF1GK302W0CD10001 (2020- )
  • Use: Normal
  • Capacity 24,1 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6165 W Profi, ->DF1DT902W0CD10001 (2020- )
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6175 W Profi PS, ->DF1GK402W0CD10001 (2020- )
  • Use: Normal
  • Capacity 24,1 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
6180 W Profi, ->DF1DU002W0CD10001 (2020- )
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Series 6 W Profi coolant specifications split into two distinct capacity groups: 16 liters for the 6130, 6145, 6165, and 6180 W Profi models, and 24.1 liters for the 6135, 6155, and 6175 W Profi PS models.
  • The PS designation on the 6135, 6155, and 6175 variants corresponds directly to the larger 24.1-liter cooling system capacity, a difference of 8.1 liters compared to the non-PS models in the same lineup.
  • A 24.1-liter cooling system capacity is notably large for an agricultural tractor and reflects a more thermally demanding engine configuration, consistent with higher-output powerplant installations typical of PS-badged variants.
  • All seven models share an identical coolant check interval of 10 hours, which places coolant level verification among the most frequent routine inspections in the service schedule.
  • The coolant change interval across all models is set at 2000 hours or 24 months, whichever comes first. The dual-trigger format means a tractor used in lower-intensity seasonal applications may reach the 24-month calendar limit well before accumulating 2000 operating hours.
  • All specifications are listed under normal use conditions, meaning the 2000-hour and 24-month change intervals apply to standard operating environments rather than elevated-stress or severe-duty cycles.
  • The serial number prefixes provided for each model, such as DF1DU902W0CD10001 for the 6130 W Profi and DF1GK202W0CD10001 for the 6135 W Profi PS, serve as build-sequence identifiers that tie these cooling system specifications to specific production runs beginning in 2020.

Other Systems