Deutz-Fahr Series 5 DS TTV

Coolant capacity & service interval

Deutz-Fahr Series 5 DS TTV uses coolant with a capacity of 12 liters. Service intervals include checks every 10 hours and changes every 2400 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5090 DS TTV, Stage 5->ZKDHF30200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5095 DS TTV, Stage 5->ZKDHF50200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5100 DS TTV, Stage 5->ZKDHF40200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5105 DS TTV, Stage 5->ZKDHF60200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5115 DS TTV, Stage 5->ZKDKJ70200TD50001 (2020- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5090 DS, ->ZKDEK40200TD50001 (2018- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5090.4 DS, ->ZKDEL20200TD50001 (2018- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5100 DS, ->ZKDEK80200TD50001 (2018- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5105 DS, ->ZKDEL60200TD50001 (2018- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
TTV 5115 DS, ->ZKDEM00200TD50001 (2018- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • All ten configurations of the Deutz-Fahr Series 5 DS TTV share a uniform cooling system capacity of 12 liters, a figure consistent with the total volume of the engine block, cylinder head passages, radiator, and connecting hoses rather than a partial top-up quantity.
  • The 10-hour coolant level check interval is among the shortest recurring service tasks listed, reflecting the critical role coolant plays in preventing overheating during sustained field operation.
  • Coolant changes are specified at 2400 hours or 24 months, whichever comes first. The dual-trigger format means calendar time governs the interval on machines with low annual hours, while engine hours govern it on heavily used units.
  • The 2400-hour change interval is notably long by agricultural equipment standards, which is typical of modern extended-life coolant formulations designed to maintain corrosion inhibitor effectiveness over multi-year service periods.
  • The five Stage 5 variants — the 5090, 5095, 5100, 5105, and 5115 DS TTV — carry serial number prefixes beginning from ZKDHF or ZKDKJ and share the same 12-liter capacity and identical check and change intervals as the earlier TTV 5090, 5090.4, 5100, 5105, and 5115 DS variants introduced from 2018.
  • The TTV 5090.4 DS is a distinct configuration from the TTV 5090 DS, differentiated by serial number prefix ZKDEL2 versus ZKDEK4, yet both carry the same 12-liter cooling system specification.
  • All specifications are listed under normal use conditions, meaning the 2400-hour and 24-month change intervals apply to standard operating environments without modification for more demanding duty cycles.

Other Systems