Deutz-Fahr Series 5 DS TTV

Brake fluid capacity & service interval

Deutz-Fahr Series 5 DS TTV uses brake fluid with a capacity of 1 liter. The service interval requires a check every 50 hours. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5090 DS TTV, Stage 5->ZKDHF30200TD50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5095 DS TTV, Stage 5->ZKDHF50200TD50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5100 DS TTV, Stage 5->ZKDHF40200TD50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5105 DS TTV, Stage 5->ZKDHF60200TD50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5115 DS TTV, Stage 5->ZKDKJ70200TD50001 (2020- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
TTV 5090 DS, ->ZKDEK40200TD50001 (2018- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
TTV 5090.4 DS, ->ZKDEL20200TD50001 (2018- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
TTV 5100 DS, ->ZKDEK80200TD50001 (2018- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
TTV 5105 DS, ->ZKDEL60200TD50001 (2018- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
TTV 5115 DS, ->ZKDEM00200TD50001 (2018- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • All ten configurations listed across the Deutz-Fahr Series 5 DS TTV range share a uniform hydraulic brake system capacity of 1 liter, indicating a relatively compact fluid reservoir consistent with the closed hydraulic brake circuits typical of modern agricultural tractors in this power class.
  • The 50-hour check interval applies under normal use conditions across every listed configuration, both the earlier TTV 5090-5115 DS variants starting from 2018 and the Stage 5 emissions-compliant models starting from 2020.
  • In agricultural machinery, a 50-hour service interval for brake fluid checks is notably frequent compared to many other fluid systems on the same equipment, reflecting the safety-critical nature of hydraulic brake circuits and the demanding operating environments tractors regularly encounter.
  • The specifications distinguish between two generational groups within the Series 5 DS TTV lineup. The pre-Stage 5 group covers the TTV 5090 DS, TTV 5090.4 DS, TTV 5100 DS, TTV 5105 DS, and TTV 5115 DS, all identified by serial number prefixes beginning from 2018. The Stage 5 group covers the 5090, 5095, 5100, 5105, and 5115 DS TTV variants, identified by different serial number prefixes beginning from 2020.
  • The TTV 5090.4 DS is a distinct variant from the TTV 5090 DS, carrying a separate serial number prefix (ZKDEL2 versus ZKDEK4), yet both share the same 1-liter capacity and 50-hour check interval for the hydraulic brake system.
  • Serial number thresholds are used here to define the applicable production range for each configuration. Each listed model is tied to a specific starting serial number, which serves as the lower boundary for which the stated brake fluid specifications apply.
  • The Stage 5 designation on the 2020 group refers to the EU Stage V emissions standard for non-road mobile machinery, representing a regulatory update rather than a mechanical change to the brake system, as the hydraulic brake fluid capacity and check interval remain identical to the earlier TTV DS variants.
  • A 1-liter brake fluid capacity across all configurations suggests the hydraulic brake circuit volume is consistent regardless of the power output differences between models such as the 5090 and the 5115, pointing to a shared brake system architecture across the Series 5 DS TTV range.

Other Systems