Deutz-Fahr Series 5 DF Keyline

Coolant capacity & service interval

Deutz-Fahr Series 5 DF Keyline uses coolant with a capacity of 12 liters. Service intervals include checks every 10 hours and changes every 2400 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5060 DF Keyline, Stage 5->NNZMM002W0BD00001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5070 DF Keyline, Stage 5->ZKDHA30200RD50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5070 DF Keyline, Stage 5->NNZMM102W0BD00001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5080 DF Keyline, Stage 5->ZKDHA70200RD5000 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5080 DF Keyline, Stage 5->NNZMM202W0BD00001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Series 5 DF Keyline cooling system holds 12 liters across all five Stage 5 configurations covered in the specifications, spanning the 5060, 5070, and 5080 model variants.
  • A 12-liter coolant capacity is consistent with a full cooling system service fill, meaning the figure accounts for the total volume circulating through the engine block, radiator, and associated passages rather than a partial top-up quantity.
  • Coolant level checks are specified at a 10-hour interval under normal use conditions, which reflects the short early-operation monitoring frequency typical of agricultural machinery running in demanding field environments.
  • The coolant change interval is set at 2400 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure means calendar time can mandate a change even when the hourly threshold has not been reached.
  • All five configurations share identical check and change intervals, indicating no differentiation in cooling system service schedules between the 5060, 5070, and 5080 power variants at the Stage 5 emissions level.
  • The 5070 DF Keyline appears under two distinct serial number ranges, beginning with NNZMM102W0BD00001 and ZKDHA30200RD50001 respectively, both starting from 2021, yet both carry the same 12-liter capacity and 2400-hour/24-month change interval.
  • Similarly, the 5080 DF Keyline is listed under two separate serial number ranges, NNZMM202W0BD00001 and ZKDHA70200RD5000, each sharing the same coolant specifications as the other configurations in the series.

Other Systems