Deutz-Fahr Series 5 DF Ecoline

Coolant capacity & service interval

Deutz-Fahr Series 5 DF Ecoline uses coolant with a capacity range of 12 to 13 liters. Service intervals include checking every 10 hours and changing every 2400 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5080 DF Ecoline, Stage 5->ZKDLP30200TD50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5080 DF Ecoline, Stage 5->ZKDLP70200TD50001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5080 DF Ecoline Compact, Stage 3B->ZKDEA90200TD10001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5080.4 DF Ecoline, Stage 3B->ZKDEB70200TD10001 (2019- )
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5090 DF Ecoline Compact, Stage 3B->ZKDEG10200TD10001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5090.4 DF Ecoline, Stage 3B->ZKDEC10200TD10001 (2019- )
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5100 DF Ecoline Compact, Stage 3B->ZKDEB30200TD10001 (2019- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5105 DF Ecoline, Stage 3B->ZKDEC50200TD10001 (2019- )
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • Across the Deutz-Fahr Series 5 DF Ecoline lineup from 2019, cooling system capacities fall into two distinct values: 12 liters and 13 liters, depending on the specific model variant.
  • The 12-liter cooling system capacity appears on the 5080 DF Ecoline Compact (Stage 3B), the 5080 DF Ecoline (Stage 5, both serial ranges), the 5090 DF Ecoline Compact (Stage 3B), and the 5100 DF Ecoline Compact (Stage 3B).
  • The 13-liter capacity is associated with the four-wheel-drive variants and the 5105 DF Ecoline, specifically the 5080.4 (Stage 3B), 5090.4 (Stage 3B), and 5105 (Stage 3B). The additional liter relative to the Compact models reflects the larger or differently configured cooling circuits on those platforms.
  • All configurations share an identical check interval of every 10 operating hours. At that frequency, the check interval functions as a routine inspection point rather than a service event, allowing early detection of coolant level loss or contamination before significant engine temperature issues develop.
  • The coolant change interval is uniform across all listed variants at 2400 hours or 24 months, whichever comes first. The dual-trigger structure means that calendar time governs the change on machines with low annual utilization, while operating hours govern it on heavily used equipment.
  • A 2400-hour change interval is relatively extended for agricultural machinery coolant, reflecting the use of long-life coolant formulations that resist silicate depletion and corrosion inhibitor breakdown over prolonged service periods.
  • Stage 3B and Stage 5 emission classifications refer to European non-road mobile machinery (NRMM) exhaust standards. The presence of both stages within the same model designation, as seen on the 5080 DF Ecoline, indicates that the same tractor model was produced with different engine configurations to meet different regional or temporal regulatory requirements, yet the cooling system capacity and service intervals remain identical at 12 liters across those Stage 5 variants.
  • Serial number thresholds are listed alongside each variant, functioning as production cut-in points that define exactly which units a given specification applies to, rather than a model year change alone governing the applicable data.

Other Systems