Deutz-Fahr Intrac

Manual transmission fluid capacity & service interval

Deutz-Fahr Intrac manual transmission fluid capacity ranges from 19,3 to 48 liters. Service intervals include checks every 500 hours and changes every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
IN-trac 6.30 (1987- )
  • Use: Normal
  • Capacity 48 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
  • Code: 50/10
IN-trac 6.60 Turbo (1987- )
  • Use: Normal
  • Capacity 48 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
  • Code: 50/10
IN-trac 2004 (1980-1991)
  • Use: Normal
  • Capacity 19,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
IN-trac 2004 (1980-1991)
  • Use: Normal
  • Capacity 19,3 liter
  • Check 500 hours
  • Change 2000 hours/ 24 months
  • Code: 8/4

Additional Notes

  • The Deutz-Fahr Intrac 2004, covering the 1980-1991 production span, carries a transaxle manual transmission fluid capacity of 19.3 liters, a figure consistent with a compact utility tractor drivetrain rather than a heavy agricultural platform.
  • The Intrac 6.30 and 6.60 Turbo, both introduced from 1987, share a substantially larger transaxle capacity of 48 liters, reflecting the greater drivetrain volume associated with higher-output tractor configurations.
  • Across all listed Intrac variants, the fluid check interval is set at 500 hours under normal use conditions, a relatively frequent inspection point that aligns with the demands placed on transaxle systems in field operation.
  • The change interval across all listed configurations is 2000 hours or 24 months under normal use, whichever comes first, meaning calendar time can trigger a service event even when hour accumulation remains low.
  • The 48-liter capacity of the Intrac 6.30 and 6.60 Turbo is more than double the 19.3-liter figure of the Intrac 2004, a difference that has direct implications for the volume of fluid required at each scheduled change interval.
  • All four listed rows are classified under normal use conditions, meaning the 2000-hour or 24-month change interval applies specifically to standard operating environments as defined for each variant.

Other Systems