Deutz-Fahr Intrac

Brake fluid capacity & service interval

Deutz-Fahr Intrac uses brake fluid with a capacity range of 0,3 to 0,7 liters. Service intervals occur every 2000 hours or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
IN-trac 6.30 (1987- )
  • Use: Normal
  • Capacity 0,7 liter
  • Change 2000 hours/ 24 months
IN-trac 6.60 Turbo (1987- )
  • Use: Normal
  • Capacity 0,7 liter
  • Change 2000 hours/ 24 months
IN-trac 6.60 Turbo (1987- )
  • Use: Normal
  • Capacity 0,3 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Intrac 6.30 and 6.60 Turbo both share a 0.7 liter capacity for the hydraulic brake system, indicating a service fill volume rather than a full overhaul quantity.
  • The 6.60 Turbo carries a second, separate brake fluid specification covering the hydraulic brake/clutch system, which holds 0.3 liters — a notably smaller reservoir dedicated to clutch actuation alongside braking.
  • Across all three rows, the change interval is set at 2000 hours or 24 months under normal use conditions, meaning whichever threshold is reached first would trigger a fluid replacement.
  • The dual-system layout on the 6.60 Turbo means two distinct fluid volumes must be serviced independently, with the brake system requiring more than twice the fluid volume of the brake/clutch system.
  • A 24-month calendar limit runs alongside the 2000-hour operational limit, reflecting the tendency of brake fluid to absorb moisture over time regardless of machine usage.
  • Both models share a starting year of 1987 for the listed configurations.

Other Systems