Deutz-Fahr DX 6/7/8

Clutch fluid capacity & service interval

Deutz-Fahr DX 6/7/8 uses clutch fluid with a capacity of 0,15 liter. Service intervals occur every 2000 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
DX 6.10 (1987-1991)
  • Use: Normal
  • Capacity 0,15 liter
  • Change 2000 hours/ 24 months
DX 6.30 (1987-1991)
  • Use: Normal
  • Capacity 0,15 liter
  • Change 2000 hours/ 24 months
DX 6.50 (1987-1991)
  • Use: Normal
  • Capacity 0,15 liter
  • Change 2000 hours/ 24 months
DX 7.10 (1987-1991)
  • Use: Normal
  • Capacity 0,15 liter
  • Change 2000 hours/ 24 months
DX 8.30 (1987-1991)
  • Use: Normal
  • Capacity 0,15 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • The Deutz-Fahr DX 6/7/8 series tractors covered here span the 1987-1991 production years across five variants: the DX 6.10, DX 6.30, DX 6.50, DX 7.10, and DX 8.30.
  • All five variants are equipped with a hydraulic clutch system, meaning clutch actuation relies on pressurized fluid rather than a mechanical linkage, which makes fluid condition and volume directly relevant to clutch engagement performance.
  • The clutch fluid capacity is 0.15 liter across every listed variant, a notably small volume that reflects the compact nature of a hydraulic clutch reservoir rather than a large integrated hydraulic circuit.
  • Because the capacity is identical across the DX 6.10, DX 6.30, DX 6.50, DX 7.10, and DX 8.30, the hydraulic clutch reservoir design appears consistent throughout the range regardless of model designation.
  • The specified change interval is 2000 hours or 24 months under normal use conditions, meaning fluid replacement is triggered by whichever threshold is reached first in regular operation.
  • The 2000-hour mark is a common agricultural service benchmark, reflecting the cumulative engine hours typical of seasonal tractor use over one to two years of field operation.
  • The 24-month calendar limit runs alongside the hour-based interval, acknowledging that hydraulic fluid degrades over time through moisture absorption and oxidation even when operating hours remain low.
  • The normal use condition applies uniformly to all five variants in the specifications, with no separate severe-duty interval listed for any model in the range.

Other Systems