Deutz-Fahr DX 4

Brake fluid capacity & service interval

Deutz-Fahr DX 4 requires brake fluid with a capacity range of 0,5 to 0,75 liters. Service intervals occur every 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
DX 4.11 SE (1988-1991)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 4.10 (1987-1988)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 2000 hours/ 24 months
DX 4.20 (1987-1991)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 2000 hours/ 24 months
DX 4.30 (1987-1988)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 2000 hours/ 24 months
DX 4.50 (1987-1991)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 2000 hours/ 24 months
DX 4.70 (1987-1991)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • The Deutz-Fahr DX 4.11 SE stands apart from all other variants in the lineup with a brake fluid capacity of 0.75 liter, while the DX 4.10, DX 4.20, DX 4.30, DX 4.50, and DX 4.70 each share a uniform capacity of 0.5 liter. The larger reservoir volume in the DX 4.11 SE reflects a more extensive hydraulic brake circuit, consistent with the additional equipment typically associated with SE trim designations.
  • All six variants specify a dual-condition change interval of 2000 operating hours or 24 months, whichever comes first. The hour-based threshold is standard practice for agricultural machinery, where annual calendar time alone is an unreliable measure of actual system wear due to highly variable seasonal usage patterns.
  • The 24-month calendar limit exists because brake fluid is hygroscopic, meaning it absorbs moisture from the atmosphere over time. Regardless of how few hours a machine has accumulated, moisture absorption degrades the fluid's boiling point and can promote internal corrosion within the hydraulic brake circuit.
  • All rows are designated under normal use conditions, which in agricultural equipment service schedules typically refers to standard field and road operation as opposed to sustained high-load or extreme-environment duty cycles that would otherwise trigger shortened intervals.
  • The DX 4.10 and DX 4.30 share the same 0.5-liter capacity and 2000-hour/24-month interval, yet each covers only a 1987-1988 production window, making them the shortest-spanning variants in the lineup. The DX 4.20, DX 4.50, and DX 4.70 carry identical specifications across the full 1987-1991 range.
  • A 0.5-liter brake fluid capacity is characteristic of a service fill volume rather than a full system overhaul quantity. In hydraulic brake systems of this type, the reservoir holds a relatively small working volume, and the specified capacity reflects the amount needed to maintain correct fluid level and complete a scheduled fluid exchange under normal service conditions.

Other Systems