Deutz-Fahr Agrotron L

Power steering fluid capacity & service interval

Deutz-Fahr Agrotron L uses power steering fluid with a capacity of 120 liters. Service intervals include checking at 50 hours and changing at 1000 hours or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Agrotron L720, ->10010 (2010-2013)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 120 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months
  • Agrotron L710 (2009-2013)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 120 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months
  • Agrotron L720 (2009-2013)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 120 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Agrotron L power steering fluid is part of a shared reservoir that also serves the transaxle and hydraulic system, meaning the 120-liter capacity figure reflects the combined fill volume for all three integrated circuits rather than a dedicated steering-only reservoir.
  • A 120-liter combined system capacity is a notably large service fill, consistent with the demands of a full-size agricultural tractor where the hydraulic circuit supports implement lifting, transmission lubrication, and steering simultaneously.
  • The check interval is set at every 50 hours of operation under normal use conditions, which in agricultural equipment typically corresponds to roughly one to two weeks of active field work during a busy season.
  • The fluid change interval is specified at 1000 hours or 24 months, whichever comes first under normal use conditions, meaning calendar time can trigger a service requirement even when the hour threshold has not been reached.
  • The Agrotron L710 and Agrotron L720 share identical capacity and interval specifications across the 2009-2013 model years, with both calling for 120 liters, a 50-hour check, and a 1000-hour or 24-month change cycle.
  • A separate row covers the Agrotron L720 from serial number 10010 onward for the 2010-2013 period, yet the capacity and service intervals remain unchanged at 120 liters, 50-hour checks, and 1000-hour or 24-month changes, indicating no revision to fluid service requirements was introduced at that production break.

Other Systems