Deutz-Fahr Agrotron 120-180.7

Brake fluid capacity & service interval

Deutz-Fahr Agrotron 120-180.7 requires brake fluid with a capacity of 1,6 liters. Service intervals include checks every 250 hours and changes every 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Agrotron 120 (2005-2007)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Agrotron 130 (2005-2007)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Agrotron 150 (2005-2007)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Agrotron 150.7 (2005-2007)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Agrotron 165.7 (2005-2007)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Agrotron 180.7 (2005-2007)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Agrotron 120-180.7 series uses a hydraulic brake system, which relies on pressurized fluid rather than a conventional mechanical linkage to actuate the brakes. Agricultural tractors commonly use this configuration to handle the braking demands of heavy loads and trailer combinations.
  • All six variants in the 2005-2007 range — the Agrotron 120, 130, 150, 150.7, 165.7, and 180.7 — share an identical brake fluid capacity of 1.6 liters. A uniform capacity across models with differing power outputs indicates a shared hydraulic brake circuit design throughout the series.
  • The 1.6-liter figure represents a service fill capacity, meaning the volume required to maintain or refill the hydraulic brake system during normal servicing rather than a full overhaul or system rebuild.
  • A check interval of 250 hours applies across all variants. In agricultural equipment, hour-based intervals reflect operational time rather than calendar time, since tractors can accumulate working hours at highly variable rates depending on seasonal use.
  • The change interval is specified as 2000 hours or 24 months, whichever comes first. The dual-condition format accounts for fluid degradation over time even when the tractor has not reached the hour threshold, since hydraulic brake fluid absorbs moisture and loses performance characteristics regardless of use.
  • The specifications apply under normal use conditions for all six models. In hydraulic brake system contexts, normal use typically refers to standard field and road operation without sustained extreme loads or temperatures that would accelerate fluid breakdown.
  • No variation in capacity or service intervals exists across the Agrotron 120, 130, 150, 150.7, 165.7, and 180.7 within the 2005-2007 model years. Despite the range spanning meaningfully different power classes, the brake system servicing requirements remain consistent throughout.

Other Systems