Deutz-Fahr Agrotrac

Coolant capacity & service interval

Deutz-Fahr Agrotrac coolant capacity ranges from 12 to 17 liters. Service intervals include checks at 10 hours and changes at 1200 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Agrotrac 115.6 Turbo (2016-2020)
  • Use: Normal
  • Capacity 17 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrotrac 100, ->5001 (2010-2016)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrotrac 110, ->10001 (2010-2016)
  • Use: Normal
  • Capacity 17 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrotrac 125 (2010-2016)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrotrac 130, ->10001 (2010-2016)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrotrac 150, ->1001 (2010-2016)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrotrac 150, 1002->10001 (2010-2016)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Agrotrac 100 in serial range up to 5001 carries a 12-liter cooling system capacity, the smallest figure across all configurations listed for the 2010-2016 model years.
  • The Agrotrac 110 up to serial 10001 and the Agrotrac 115.6 Turbo both share a 17-liter cooling system capacity, the largest value recorded across all rows in these specifications.
  • The Agrotrac 125, Agrotrac 130 up to serial 10001, and both Agrotrac 150 serial ranges all carry a 16-liter cooling system capacity, placing them between the 12-liter and 17-liter figures seen in other configurations.
  • The Agrotrac 150 is represented by two distinct serial ranges: up to serial 1001 and from serial 1002 up to 10001. Both share identical 16-liter capacity and the same check and change intervals, indicating no specification difference between the two production bands.
  • A 10-hour check interval applies across all configurations listed. In agricultural equipment, such a short interval typically reflects a break-in or early-operation verification rather than a full service event.
  • The coolant change interval of 1200 hours or 24 months, whichever comes first, applies uniformly across all rows under normal use conditions. The dual-trigger structure means time elapsed can mandate a change even when the hour threshold has not been reached.
  • The Agrotrac 115.6 Turbo covers the 2016-2020 period, while all other configurations in these specifications span 2010-2016, placing the 115.6 Turbo in a later production window with no overlap in years with the earlier models.

Other Systems