Deutz-Fahr AgroPrima

Differential fluid capacity & service interval

Deutz-Fahr AgroPrima differential fluid capacity ranges from 5 to 8 liters. Service intervals include checking at 500 hours and changing at 1000 hours or 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • DX 3.30 (AgroPrima) (1995-1999)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 3.50 (AgroPrima) (1995-1999)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.36 (AgroPrima) (1993-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.46 (AgroPrima) (1993-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.56 (AgroPrima) (1991-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 6.06 (AgroPrima) (1991-1995)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 6.16 (AgroPrima) (1991-1995)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.11 (AgroPrima) (1990-1996)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.31 (AgroPrima) (1990-1993)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.51 (AgroPrima) (1990-1993)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)

Additional Notes

  • Across all Deutz-Fahr AgroPrima variants listed, the front differential fluid check interval is set at 500 hours under normal use conditions, with a full fluid change required at 1000 hours or 12 months, whichever comes first. The dual-trigger change interval reflects standard agricultural equipment servicing practice, where calendar time accounts for seasonal or low-hour operation patterns.
  • The DX 3.30 and DX 3.50 share an identical front differential capacity of 5 liters, with both models covering the 1995-1999 production period. A 5-liter fill volume is typical of a compact front differential housing on mid-range agricultural tractors.
  • The DX 4-series models, spanning the DX 4.11, DX 4.31, DX 4.36, DX 4.46, DX 4.51, and DX 4.56, all carry the same 5-liter front differential capacity despite covering different production windows between 1990 and 1996. Consistent capacity across a model family generally indicates a shared axle or differential housing design.
  • The DX 6.06 and DX 6.16, both produced from 1991-1995, carry a front differential capacity of 8 liters, which is 60 percent greater than the 5-liter figure specified for the DX 3 and DX 4 series. A larger differential housing volume in the DX 6 models corresponds to the heavier-duty front axle assemblies typically found in higher-output tractor configurations.
  • The 12-month calendar interval paired with the 1000-hour change interval applies uniformly across all ten AgroPrima variants listed. In agricultural settings, tractors may accumulate operating hours slowly during off-season periods, making the annual calendar limit a practical safeguard against fluid degradation from moisture contamination and oxidation over time.
  • The DX 4.31 and DX 4.51 share the earliest and shortest production window in the dataset, running from 1990-1993, while the DX 4.11 extends through 1996. All three carry the same 5-liter front differential specification, indicating continuity in the front axle design across the early and later portions of the DX 4 lineup.

Other Systems