Deutz-Fahr AgroPrima

Brake fluid capacity & service interval

Deutz-Fahr AgroPrima uses brake fluid with a capacity of 0,75 liter. Service intervals occur every 2000 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
DX 3.30 (AgroPrima) (1995-1999)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 3.50 (AgroPrima) (1995-1999)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 4.36 (AgroPrima) (1993-1995)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 4.46 (AgroPrima) (1993-1995)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 4.56 (AgroPrima) (1991-1995)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 6.06 (AgroPrima) (1991-1995)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 6.16 (AgroPrima) (1991-1995)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 4.11 (AgroPrima) (1990-1996)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 4.31 (AgroPrima) (1990-1993)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months
DX 4.51 (AgroPrima) (1990-1993)
  • Use: Normal
  • Capacity 0,75 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • All Deutz-Fahr AgroPrima variants listed carry a hydraulic brake system fluid capacity of 0.75 liter. In agricultural machinery, a sub-one-liter brake fluid capacity is typical of a compact hydraulic circuit serving wet disc or oil-immersed brake assemblies rather than a large open reservoir.
  • The service interval across every listed AgroPrima model is 2000 hours or 24 months, whichever comes first. The dual-trigger format, combining an engine-hour threshold with a calendar limit, accounts for machines that accumulate low annual hours yet still require fluid renewal on a time basis due to moisture absorption in brake fluid over time.
  • All ten variants share identical capacity and interval figures under normal use conditions. In service documentation, a "normal" use designation typically reflects standard field operation as opposed to severe-duty cycles involving extreme loads, temperatures, or continuous heavy braking on slopes.
  • The DX 3.30 and DX 3.50 share a production window of 1995-1999, placing them among the later models in the AgroPrima lineup covered by these specifications, yet both carry the same 0.75-liter capacity and 2000-hour/24-month interval as the earlier four-cylinder variants.
  • The DX 4-series spans the widest range of production years within the listed models, with individual variants appearing from 1990 through 1999. Despite differences in model designation and production period, the hydraulic brake system capacity and change interval remain uniform across all DX 4-series entries.
  • The DX 4.31 and DX 4.51 share a production window of 1990-1993, representing the earliest models in the listed specifications. Both carry the same 0.75-liter capacity and 2000-hour/24-month interval as later variants.
  • The DX 6.06 and DX 6.16, covering 1991-1995, are the only six-cylinder-designated models in the listed specifications. Both share the 0.75-liter brake fluid capacity and the 2000-hour/24-month change interval applied uniformly across the AgroPrima range.

Other Systems