Deutz-Fahr Agroplus S

Power steering fluid capacity & service interval

Deutz-Fahr Agroplus S power steering fluid capacity ranges from 32 to 41 liters. Service intervals include checking at 300 hours and changing at 1200 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Agroplus S 100 (2005-2007)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Capacity 32 liter (Revershift)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Agroplus S 70 (2005-2007)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Capacity 32 liter (Revershift)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Agroplus S 75 (2005-2007)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Capacity 32 liter (Revershift)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Agroplus S 90 (2005-2007)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Capacity 32 liter (Revershift)
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Deutz-Fahr Agroplus S power steering fluid specification covers a shared system that also serves the transaxle and hydraulic circuit, meaning the listed capacity reflects the entire combined reservoir rather than a dedicated steering-only volume.
  • All four variants in the 2005-2007 range, the S 70, S 75, S 90, and S 100, carry identical capacity and interval specifications, indicating no differentiation in the power steering and hydraulic system design across engine output levels within the lineup.
  • The standard transmission configuration holds 41 liters, a substantial volume consistent with a large integrated transaxle and hydraulic reservoir common in agricultural tractors of the period.
  • Tractors equipped with the Revershift transmission use a reduced capacity of 32 liters. Revershift refers to a power-shuttle or electro-hydraulic direction-change transmission, and the lower fill volume reflects a different internal layout compared to the standard gearbox.
  • A fluid level check interval of 300 hours applies under normal use conditions, serving as a routine inspection point well ahead of the full drain-and-fill service.
  • The fluid change interval under normal use conditions is set at 1,200 hours or 12 months, whichever comes first. The dual-trigger format means calendar time can mandate a change even when the hour threshold has not been reached, which is relevant for lower-utilization machines.

Other Systems