Deutz-Fahr Agroplus F Keyline

Power steering fluid capacity & service interval

Deutz-Fahr Agroplus F Keyline uses power steering fluid with a capacity range of 35,5 to 41,5 liters. Service intervals include checking at 50 hours and changing at 1200 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Agroplus 405 F keyline, ->ZKDAB902W0TD30001 (2015-2020)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41,5 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • Agroplus 55 F keyline , ->ZKDCK60200RD10001 (2015-2020)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 35,5 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • Agroplus 65 F keyline , ->ZKDCK90200RD10001 (2015-2020)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 35,5 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • Agroplus 75 F keyline , ->ZKDCL20200RD10001 (2015-2020)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 35,5 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • Agroplus 80.4 F keyline , ->ZKDCL50200RD10001 (2015-2020)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 35,5 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The power steering fluid specification across the Deutz-Fahr Agroplus F Keyline range covers a shared system that also serves the transaxle and hydraulic functions, meaning the listed capacity reflects the total fill volume for all three integrated circuits rather than a dedicated steering reservoir alone.
  • The Agroplus 405 F Keyline, identified up to serial number ZKDAB902W0TD30001, carries a fluid capacity of 41.5 liters, which is notably higher than the 35.5-liter capacity found across the 55, 65, 75, and 80.4 F Keyline variants.
  • The 35.5-liter capacity shared by the Agroplus 55, 65, 75, and 80.4 F Keyline models indicates a common transaxle and hydraulic system architecture across those four variants, despite differences in engine output implied by their model designations.
  • All five configurations carry a fluid check interval of 50 operating hours under normal use conditions, which is a relatively short inspection cycle and reflects the critical role the shared system plays in both steering response and hydraulic function.
  • The fluid change interval is set at 1200 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure means calendar time can mandate a change even when the hourly threshold has not been reached, as would be the case on low-utilization machines.
  • The 2015-2020 date range applies uniformly to all five configurations listed, with each variant identified by a specific serial number ceiling rather than a production year alone, tying the specifications to a defined unit boundary.

Other Systems