Deutz-Fahr Agroplus F COM3

Differential fluid capacity & service interval

Deutz-Fahr Agroplus F COM3 differential fluid capacity is 6 liters. Service intervals include checks at 300 hours and changes at 1200 hours or 24 months and 2400 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Agroplus F 320, ->1001 (2009-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agroplus F 320, 1002->5001 (2009-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agroplus F 410, ->1001 (2009-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 2400 hours/ 12 months
  • Agroplus F 410, 1002->5001 (2009-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agroplus F 420, ->1001 (2009-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • Agroplus F 420, 1002->5001 (2009-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • All six configurations of the Deutz-Fahr Agroplus F COM3 front differential share a 6-liter fluid capacity, regardless of model variant or serial number range. A consistent capacity across variants of this kind typically reflects a common front axle housing design used throughout the lineup.
  • The check interval is set at 300 hours across all configurations. In agricultural equipment, a 300-hour check interval for differential fluid is a routine inspection point to verify fluid level and condition without a full drain-and-fill service.
  • The Agroplus F 320 carries a 1200-hour or 24-month change interval for both its early serial range (up to serial 1001) and its later range (1002 to 5001). The dual-condition format means whichever threshold is reached first triggers the service.
  • The Agroplus F 410 shows a notable split between serial number ranges. Units up to serial 1001 carry a 2400-hour or 12-month change interval, while units from serial 1002 onward carry a 1200-hour or 24-month interval. This represents a significant difference in both the hour threshold and the calendar limit between the two production ranges of the same model.
  • The 2400-hour change interval on early Agroplus F 410 units (up to serial 1001) is the longest hour-based interval in the dataset. Paired with a 12-month calendar limit, the calendar condition would typically be reached well before the hour threshold under normal seasonal agricultural use.
  • The Agroplus F 420 applies a 1200-hour or 24-month change interval uniformly across both serial number ranges, mirroring the structure seen on the F 320. The alignment between the F 320 and F 420 in both capacity and interval suggests a shared front axle specification for those two variants.

Other Systems