Deutz-Fahr Agroplus F COM3

Coolant capacity & service interval

Deutz-Fahr Agroplus F COM3 uses coolant with a capacity range of 12 to 13 liters. Service intervals include checking every 10 hours and changing every 1200 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Agroplus F 320, ->1001 (2009-2015)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agroplus F 320, 1002->5001 (2009-2015)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agroplus F 410, ->1001 (2009-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agroplus F 410, 1002->5001 (2009-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agroplus F 420, ->1001 (2009-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agroplus F 420, 1002->5001 (2009-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Agroplus F COM3 cooling system capacities split along engine size lines. The F 320 variant holds 12 liters, while the F 410 and F 420 variants each hold 13 liters, reflecting the larger displacement of the latter two engines.
  • The 1-liter difference in coolant capacity between the F 320 and the F 410/F 420 is consistent across both serial number ranges within each model, indicating the variation is tied to engine configuration rather than production batch.
  • Each variant carries two distinct serial number ranges — up to serial 1001 and from serial 1002 to 5001 — yet the coolant capacity and service intervals remain identical within each model across both ranges.
  • A coolant level check interval of 10 hours applies across all six configurations. On agricultural equipment operating in field conditions, a 10-hour check interval reflects the high thermal and mechanical demands placed on the cooling system during continuous work cycles.
  • The coolant change interval is set at 1200 hours or 24 months, whichever comes first. The dual-trigger structure accounts for calendar degradation of coolant additives, which can occur even when hour accumulation is low due to seasonal or part-time use patterns.
  • A 1200-hour change interval on a tractor used in normal agricultural service can span several seasons, making the 24-month calendar limit a practical safeguard against coolant chemistry breakdown independent of machine usage intensity.
  • All six rows are designated for normal use conditions. The 1200-hour/24-month change interval and 10-hour check interval apply specifically under those normal operating conditions.

Other Systems