Deutz-Fahr Agromaxx 4 E

Power steering fluid capacity & service interval

Deutz-Fahr Agromaxx 4 E uses power steering fluid with a capacity of 29 liters. Service intervals include checking at 50 hours and changing at 1200 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • AGROMAXX 4045 E (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 29 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • AGROMAXX 4050 E (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 29 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • AGROMAXX 4055 E (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 29 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • AGROMAXX 4060 E (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 29 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Agromaxx 4 E power steering fluid circuit is shared with the transaxle and hydraulic system, meaning the 29-liter capacity figure reflects a combined reservoir rather than a dedicated steering-only volume.
  • A 29-liter combined system capacity is a substantial fill volume, consistent with integrated hydraulic systems on compact-to-mid-range agricultural tractors where a single fluid reservoir serves multiple functions simultaneously.
  • All four variants in the Agromaxx 4 E lineup — the 4045 E, 4050 E, 4055 E, and 4060 E — share an identical 29-liter capacity, indicating no variation in reservoir size across the model range starting from 2020.
  • The check interval is set at 50 hours under normal use conditions, which in operational terms means fluid level inspections are required at relatively frequent intervals relative to the change interval, reflecting the importance of monitoring a shared multi-function system.
  • The fluid change interval is specified at 1200 hours or 24 months under normal use conditions, whichever comes first, meaning calendar time can trigger a change obligation even when the hour threshold has not been reached.
  • The dual-trigger change interval of 1200 hours and 24 months under normal use conditions means that low-utilization machines reaching the 24-month mark are subject to a fluid change regardless of accumulated operating hours.

Other Systems