Deutz-Fahr Agromaxx 4 E
Coolant capacity & service interval
Deutz-Fahr Agromaxx 4 E uses coolant with a capacity range of 5 to 12 liters. Service intervals include a check at 10 hours and a change at 1200 hours or 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| AGROMAXX 4045 E (2020- ) |
|
| AGROMAXX 4050 E (2020- ) |
|
| AGROMAXX 4055 E (2020- ) |
|
| AGROMAXX 4060 E (2020- ) |
|
Additional Notes
- The Deutz-Fahr Agromaxx 4 E cooling system capacities split into two distinct groups across the four variants: the 4045 E holds 5 liters, while the 4050 E, 4055 E, and 4060 E each hold 12 liters.
- The 5-liter capacity of the 4045 E represents a notably smaller cooling circuit compared to the 12-liter figure shared by the three larger variants, reflecting differences in engine displacement and thermal load between the models.
- All four variants share a coolant check interval of every 10 hours, which is a short-cycle inspection point typical of agricultural equipment operating in demanding field conditions.
- The coolant change interval across all variants is set at 1200 hours or 24 months, whichever comes first, meaning calendar time can trigger a change even when the hour threshold has not been reached.
- All four variants carry a normal use condition designation for the cooling system, meaning the 1200-hour/24-month change interval and 10-hour check interval apply under standard operating circumstances.
- The 4050 E, 4055 E, and 4060 E share an identical cooling system capacity of 12 liters alongside identical check and change intervals, indicating a common cooling architecture across those three variants despite their differing model designations.