Deutz-Fahr 5600

Coolant capacity & service interval

Deutz-Fahr 5600 coolant capacity is 55 liters. Service intervals include checking every 10 hours and changing every 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5650 HTS COM 3, ->13500 (2009-2014)
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
5660 HTS Climber, ->13900 (2009-2014)
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
5660 HTS COM 3, ->13900 (2009-2014)
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
5665 HTS COM 3, ->13900 (2009-2014)
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
5690 H COM 3, ->13900 (2009-2014)
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
5690 HTS COM 3, ->13900 (2009-2014)
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
5695 HTS COM 3, ->13900 (2009-2014)
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
5680 H/HTS (2000-2008)
  • Use: Normal
  • Capacity 55 liter
  • Check 10 hours
  • Change 24 months
5690 H/HTS (2000-2008)
  • Use: Normal
  • Capacity 55 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • All Deutz-Fahr 5600 series variants listed here share a uniform cooling system capacity of 55 liters, a figure consistent with large-displacement agricultural combine harvester engines where substantial thermal mass is needed to manage heat across extended field operation cycles.
  • The 2009-2014 COM 3 variants, including the 5650 HTS, 5660 HTS, 5665 HTS, 5690 H, 5690 HTS, and 5695 HTS, all specify a coolant change interval of 24 months under normal use conditions, with no periodic level check interval listed in their specifications.
  • The 2000-2008 variants, the 5680 H/HTS and 5690 H/HTS, carry an additional 10-hour check interval alongside the 24-month change interval. A 10-hour check interval in agricultural equipment typically corresponds to daily or near-daily inspection during active harvest seasons.
  • The 24-month coolant change interval applies uniformly across both the 2000-2008 and 2009-2014 model year groups, meaning the transition to COM 3 emission-compliant engines did not alter the replacement frequency for the cooling system fluid.
  • The 5660 HTS Climber variant shares the same 55-liter capacity and 24-month change interval as the standard 5660 HTS COM 3, indicating no cooling system differentiation between the Climber configuration and the conventional COM 3 variant within the 2009-2014 production window.
  • Serial number suffixes such as "->13500" and "->13900" on the 2009-2014 COM 3 models denote production cutoff points within those model years, and all units within those ranges share identical cooling system specifications.

Other Systems